Zywell Zy 808 Printer Driver Portable May 2026

To install the driver for your Zywell ZY-808 Thermal Receipt Printer , you can download the official software from the Zywell Download Center or the alternative Zywell.net download page

To ensure compatibility and security, always download drivers directly from the official source: zywell zy 808 printer driver

The Zywell ZY-808 is a high-speed 80mm thermal receipt printer widely used in POS (Point of Sale) environments such as restaurants, retail stores, and hotels. 🛠️ Driver Download & Support To install the driver for your Zywell ZY-808

Critically important: Always scan downloaded driver files with Windows Defender or Malwarebytes before installation. Run the downloaded driver installer (usually setup

  • Run the downloaded driver installer (usually setup.exe or driver_install.bat) as Administrator.
  • Choose Local Printer (not network) when prompted, even if you plan to use USB later.
  • Select the port: USB001 (Virtual printer port for USB).
  • When asked for a disk, click “Have Disk” and browse to the extracted driver folder (where the .inf file lies).
  • Select Zywell ZY 808 from the model list. Ignore any “Driver not signed” warnings—click “Install anyway.”
  • Finish the wizard.
    1. Connect the printer to your router via Ethernet cable.
    2. Turn the printer off. Hold the FEED button and turn it on. Keep holding the FEED button until it prints a self-test page. This page will show the printer's IP Address (e.g., 192.168.1.87).
    3. Install the driver as described above.
    4. In Printer Properties > Ports, click Add Port.
    5. Select Standard TCP/IP Port.
    6. Enter the IP Address from the self-test page.
    7. Finish the wizard and ensure that new port is checked.