Zd10-100 Datasheet
ZD10-100 Flexible Thin Film Pressure Sensor Technical Report The Go to product viewer dialog for this item.
2. Powering a 3D Printer (12V heated bed)
The 8.5A rating is marginal for a 12V/120W bed. Solution: Use two ZD10-100 units in parallel (not recommended without current sharing) or one unit with a solid-state relay. The datasheet explicitly prohibits direct parallel operation without external OR-ing diodes. zd10-100 datasheet
include its physical dimensions and electrical response characteristics: Value/Specification Sensing Range 0 – 500g (standard range) Thickness ≤is less than or equal to 0.3 mm (typically < 0.25 mm) Response Point ≤is less than or equal to 50g (some variants reported at < 20g) Dimensions Length: 104.7 mm; Width: 10 mm Sensing Area 85 mm x 10 mm Response Time Recovery/Resume Time Durability > 1 million cycles Operating Temp -20°C to 60°C 2. Key Features ZD10-100 Flexible Thin Film Pressure Sensor Technical Report
- Device photo or markings
- Package type (e.g., rectangular module, screw terminals, TO-220)
- Circuit context
When no pressure is applied, the resistance is infinite (open circuit). Actuation: Device photo or markings Package type (e
