Xprinter Xp-420b: Wifi Setup

1. Download and install the software: Visit the Xprinter website and download the XP-420B printer software for your operating system.
2. Launch the software: Run the software and select the "Printer Setup" or "WiFi Setup" option.
3. Select your printer model: Choose your Xprinter XP-420B printer model from the list of available devices.
4. Configure WiFi settings: Follow the on-screen instructions to select your WiFi network and enter your password.
5. Update printer firmware: The software may prompt you to update your printer's firmware; follow the instructions to complete the update.

This is the best method for teams or users who want the printer to stay connected to the office network. xprinter xp-420b wifi setup

XPrinter XP-420B Wi-Fi Setup Guide

The XPrinter XP-420B is a 4x6 thermal label printer that supports USB and Wi-Fi connections. Setting it up over Wi-Fi allows multiple computers or devices on the same network to print without a direct USB cable. The Xprinter XP-420B Go to product viewer dialog

Настройка WI-FI принтера этикеток Xprinter XP-420B Download and install the software : Visit the

• Download the app on your Android or iOS device.
• Turn on the printer. Press and hold the Feed button for 5-10 seconds to enter AP mode (Wi-Fi LED blinks slowly).
• In the app, connect to the printer’s own Wi-Fi hotspot (e.g., “XP-420B_XXXX”).
• Enter your home Wi-Fi credentials.
• The printer will restart and connect to your home network.

Before You Begin

• Unbox the printer and connect it to power using the included adapter.
• Insert a roll of 4x6 thermal labels (print side up).
• Make sure your Wi-Fi network is 2.4GHz. The XP-420B does not support 5GHz networks.
• Have your Wi-Fi network name (SSID) and password ready.

Usually indicates a paper jam or the cover is not fully closed.