Simco Fmx002 Manual Top !!top!! < 90% SIMPLE >

If you want, I can:

Precision Guidance: Features a unique dual LED guide ring light system. When the two red spots overlap on the target surface, it confirms the device is at the correct 1-inch (25mm) measuring distance. simco fmx002 manual top

• Always zero the unit with the manual top closed before measuring.
• Manually rotate the shutter to measure small, precise areas.
• Store the unit with the manual top closed to protect the sensor from dust.
• When the auto-zero fails, switch to manual mode as a workaround.

Pro Tip from the Manual (Top Section):

Critical Warning: Never open the manual top shutter while the device is auto-zeroing. Always close it, zero, then open. The Simco FMX-002 Go to product viewer dialog

Step 1: Power On and Initial Check

• Press the red POWER button on the side.
• Verify the battery indicator is full (two alkaline 9V batteries).
• Hold the unit 1 inch (25mm) away from a known grounded metal plate. The display should read 0.00 kV (±0.1 kV).

Data Retention: If a reading needs to be recorded, press the Hold button to freeze the display. Conclusion Always zero the unit with the manual top

By following these manual guidelines, users can ensure their Simco FMX-002 provides the critical data needed to maintain an ESD-safe workplace and protect sensitive electronic components from catastrophic static discharge.