Hsp47sp10 Download New ((install)) | Siemens Mc Drives V15

Here’s a technical write-up based on your request for “Siemens MC Drives V15 HSP47SP10 download new.”

7. Troubleshooting

| Issue | Solution | |-------|----------| | HSP not listed in web search | Siemens may have removed SP10; use SP12 or SP14 – still compatible with V15. | | Installation fails | Ensure TIA Portal V15 is updated to Update 4 or higher. | | Drive still not visible | Check if the drive firmware is too new for V15 – upgrade to TIA Portal V17+. | siemens mc drives v15 hsp47sp10 download new

  • Create a new project.
  • Open "Devices & Networks".
  • Go to "Drives & Starters" > "SINAMICS".
  • You should now see SINAMICS S120, S210, and G120 with the "MC" (Motion Control) technology option.

"It’s the firmware," Elias muttered, rubbing his temples. "The old TIA Portal project doesn't have the hardware support package for these new power modules." Here’s a technical write-up based on your request

Prerequisite: You must have SINAMICS Startdrive V15 already installed on your system. Create a new project

Alternative Entry ID (109757590): Specifically lists the Support Package for Sinamics Firmware Version 4.7 SP10. Installation Requirements

  1. Click on the entry titled "Hardware Support Package (HSP) for SINAMICS drives V15".
  2. Look at the Version column. You are looking for: V15 SP10 (or V15.1 SP10).
  3. Ensure the description explicitly mentions "SINAMICS MC" or "Motion Control" .

Open TIA Portal V15 and navigate to Options > Support Packages.

Prerequisites

  • TIA Portal V15 (Professional or Basic) already installed.
  • Administrator rights on your PC.
  • All TIA Portal instances closed.