Skip to main content

Siemens Drive Fault Code 7902 Exclusive

The Siemens drive fault code indicates that motor has stalled or is out of step

Step 4: Drive Parameter Check

  • Verify motor nameplate data entered in the drive parameters (rated voltage, current, frequency, speed).
  • Check parameter p3230 (Sinamics: Phase failure detection threshold). Default is usually 5–10% imbalance. If set too low (e.g., 2%), the drive may be overly sensitive to normal fluctuations. Increase cautiously.
  • Check p3231 (Delay time for phase failure detection). A very short delay (e.g., 0 ms) can cause nuisance trips. Adjust to 20–50 ms if transient imbalances occur during start-up.

What Is Siemens Fault Code 7902?

In the Siemens drive ecosystem, fault code 7902 is universally associated with a motor lead or power cable phase failure. Specifically, it indicates that the drive has detected an asymmetry or interruption in the motor’s supply voltage (usually one of the three phases is missing). siemens drive fault code 7902

Check for mechanical obstructions (brake locked, jammed load). Check motor cable connectivity. The Siemens drive fault code indicates that motor

Refer to the Drive Manual: The first step is to consult the user manual or documentation specific to your Siemens drive model. Siemens provides detailed descriptions of fault codes, recommended actions, and troubleshooting guides. Verify motor nameplate data entered in the drive

Manually rotate the motor (if safe) to ensure the load isn't seized or jammed. Verify Parameter Settings: