Selmarturbo4batterychargerinstructions
SelmarTurbo 4 Battery Charger — Quick Start & Instructions
Overview
The SelmarTurbo 4 is a 4-bank smart battery charger/maintainer for lead‑acid batteries (flooded/wet, AGM, GEL) and many 12 V automotive, marine, and deep‑cycle batteries. Each bank charges independently and includes automatic multi‑stage charging, short‑circuit and reverse‑polarity protection, and maintenance/float mode for long‑term storage.
- Red Light (Constant): Charging in progress (bulk phase).
- Red Light (Flashing): Desulfation mode or error (check connections).
- Green Light (Flashing): 80%+ charged, absorption phase.
- Green Light (Constant): Fully charged, float maintenance mode.
Introduction: Congratulations on purchasing the Selfmart Turbo 4 Battery Charger! This user manual will guide you through the safe and effective use of your new battery charger. selmarturbo4batterychargerinstructions
5. Powering On and Charging Sequence
- Plug charger into a 240V AC (or 110V) earthed outlet.
- The LCD or LED panel (depending on model revision) will light up.
- Each bank operates independently through four stages:
Preparation: Ensure the battery terminals are clean. If the battery is not maintenance-free, check fluid levels. SelmarTurbo 4 Battery Charger — Quick Start &
Step-by-Step: How to Connect the Charger
Following the selmarturbo4batterychargerinstructions order of operations prevents sparks near the battery. Red Light (Constant): Charging in progress (bulk phase)
Monitoring: Do not leave the charger unattended for long periods, as manual chargers can damage a battery if left connected after reaching full charge. Old Car Battery Charger - How to use it? | DIYnot Forums