Point-n-measure Digital Tape W5746 User Manual ~upd~ May 2026

The Point-N-Measure Digital Tape (model W5746) has a standout feature: it combines a standard retractable steel tape (up to 16 ft) with a laser distance measurer (up to 50 ft) into one tool.

3. Device Diagram (Key Features)

| Callout | Component | Function | | :--- | :--- | :--- | | 1 | Laser Aperture | Emits the laser beam. | | 2 | LCD Display | Shows measurement, battery level, and unit. | | 3 | Power/Measure Button | Turns unit ON and takes a measurement. | | 4 | Reference Button | Switches measurement from back of tool to front. | | 5 | Unit/Function Button | Changes between ft/in, decimal feet, and meters. | | 6 | Battery Door | Located on back; holds 2x AAA batteries. | | 7 | Belt Clip | Attaches to pocket or tool belt. | Point-N-Measure Digital Tape W5746 User Manual

Need to make sure the language is clear and concise, avoiding technical jargon as much as possible. Use bullet points for components and numbered steps for procedures. Also, mention the user support or warranty information at the end. The Point-N-Measure Digital Tape (model W5746) has a

Units: Switchable between Imperial (Feet/Inches) and Metric (Meters). 2. Getting Started: Basic Operation Battery Installation Open the battery compartment on the back of the device. Snap in a fresh 9V alkaline battery. Point-N-Measure Digital Tape W5746 User Manual

9. Specifications

| Parameter | Value | |-----------|-------| | Laser range | 0.5 – 130 ft (0.2 – 40 m) | | Laser accuracy | ± 1/16 in (± 1.5 mm) | | Tape range | 0 – 16 ft (0 – 5 m) | | Tape accuracy | Class II (± 1.2 mm over 5 m) | | Laser class | Class 2, 635 nm, <1 mW | | Battery | 3.7 V Li-ion, 400 mAh | | Auto shut-off | 180 sec (laser) / 300 sec (idle) | | Operating temp | 32°F – 104°F (0°C – 40°C) | | Weight | 8.5 oz (240 g) |

• Website: [Insert your support URL]
• Email: support@pointnmeasure.com
• Phone: 1-800-555-TAPE (8273)