Movelo Algonquin 26 Manual _best_

Introduction

Step 4: Inflation Procedure (Crucial Section from the Manual)

1. Open the valve cap by turning it counterclockwise ¼ turn (do not unscrew fully – it should pop up).
2. Connect the pump hose to the valve. Push down and twist slightly to lock.
3. Set pump to dual-action mode (both up and down strokes push air). For the first 100 strokes, use dual-action.
4. Switch to single-action after 12 PSI to reduce effort.
5. Inflate to 12-15 PSI only. The manual warns: Do not exceed 18 PSI.
6. Close the valve cap by pressing down and turning clockwise until flush.

Ensure the fork is facing forward (the front brake should be at the front). Insert the handlebar stem into the fork tube, ensuring it is buried past the "Minimum Insertion" mark. Tighten the expander bolt until the bars are firm and aligned with the front wheel. Installing the Front Wheel movelo algonquin 26 manual

or Tri-Flow) rather than household oils like WD-40, which can act as a solvent and strip protection. Safety Checks Open the valve cap by turning it counterclockwise