Motorola Gp88s Programming Software

The Motorola GP88s radio requires specific GP88s/GP2000 Customer Programming Software (CPS), often version R01.00.03 or R01.03.00, along with a Windows-compatible programming cable, frequently using an FTDI chipset. Successful programming involves using a RIB-less USB cable, ensuring correct COM port configuration, and backing up the original codeplug to avoid potential radio damage. For more details, visit the Motorola Solutions support page. Motorola Gp88 Programming Software Download - Facebook

Cable Options:

• Motorola RKN4095 – Genuine OEM cable (serial, not USB). Highly recommended but expensive and rare.
• Aftermarket USB programming cable – Widely available on eBay or Amazon. Ensure it specifically lists “GP88S” and uses an FTDI or genuine Prolific chip. Avoid “cheap blue cables” with counterfeit chips—they cause communication errors.

There are several programming software options available for the Motorola GP88S, including: motorola gp88s programming software

Transmit (TX) Frequency: Usually the same as RX, unless you are using a repeater. Motorola RKN4095 – Genuine OEM cable (serial, not USB)

This guide covers everything you need to know about the software requirements, the setup process, and how to successfully configure your radio. Understanding the Motorola GP88s Software There are several programming software options available for

Popular Motorola GP88S Programming Software Options

2. Software Identification & Versions

The official software for the GP88S is Motorola Professional Radio CPS (often referred to as GP328/GP338/GP88S CPS). Key version details:

7. Legal & Compliance Notes