Midland 75822 Channel Mod
The Midland 75-822 is a unique radio because it is a removable handheld CB that comes with a mobile docking station.
Please note: This post is for educational and informational purposes only regarding radio theory and legal compliance. Modifying radio equipment to operate on unauthorized frequencies is a violation of FCC regulations in the United States and similar laws internationally. midland 75822 channel mod
- Connect your frequency counter to the antenna jack (use a T-connector and dummy load).
- Set your stock channel knob to Channel 1.
- Flip your new "Band" switches to "Low Band."
- Adjust the VCO coil (usually a large, square, adjustable ferrite core or trimmer capacitor) until the frequency counter reads 26.965 MHz.
- Repeat for "Mid Band" and "Hi Band," adjusting two different coils or trimmers.
Part 5: Legal & Safety Implications (Do Not Ignore)
In the United States, the FCC strictly regulates CB radios under Title 47, Part 95, Subpart D. The Midland 75-822 is a unique radio because
Always use an SWR (Standing Wave Ratio) meter to tune an external antenna. A well-tuned antenna ensures that the maximum amount of power is being radiated rather than reflected back into the radio. 2. Power Management Connect your frequency counter to the antenna jack
Step 4: Add Jumpers or Diodes for Expanded Channels
Based on popular (but unverified) mod guides:
Need specific schematics for your board revision? Check online forums like "CB Tricks" or "Worldwide DX Radio Forum." Always download the service manual for the Midland 75822 before touching a soldering iron.
- For 10 meters (28.0-29.7 MHz): You need an FCC Technician or General class amateur license.
- For freeband (27.405-28.0): No license exists. Use is technically illegal in the U.S. It is not worth the risk.