Hp Un2420 Mobile Broadband Module Driver Windows 10 Upd Here

Getting the HP UN2420 (Gobi 2000) mobile broadband module to work on Windows 10 can be tricky because it’s an older piece of hardware. Since there isn't a dedicated Windows 10 installer from HP, you have to use the Windows 7 compatibility trick. 🛠️ How to Install HP UN2420 Drivers on Windows 10 1. Download the Official Driver

Point the search to the extracted folder in C:\SWSetup\sp51022 and ensure Include subfolders is checked. hp un2420 mobile broadband module driver windows 10 upd

Official Support: Discontinued. HP officially supports this module only up to Windows 7. Getting the HP UN2420 (Gobi 2000) mobile broadband

1. Understand the Challenge

The HP un2420 is based on the Qualcomm Gobi 2000 chipset.
HP never released official Windows 10 drivers for it (last official support: Windows 7).
Windows 10’s built-in mobile broadband stack may not recognize it automatically.
64-bit Windows 10 may refuse to load unsigned legacy drivers without special steps.

Given that Windows 10 updates will periodically reset driver settings, and because modern carriers are shutting down 3G networks (Verizon shuttered 3G at the end of 2022; AT&T in early 2022), your time using this module is limited. The HP un2420 is based on the Qualcomm Gobi 2000 chipset

HP un2420 Mobile Broadband Module Diagnostics (COM5): Hardware IDs: USB\Vid_03f0&Pid_251d&Rev_0002&Mi_01&Os_NT. Hardware IDs: USB\ HP Support Community

The modem dials but disconnects immediately

Cause: Incorrect APN or carrier settings.
Solution: Create a new Dial-up connection. For the phone number, try internet or wap.cingular (for AT&T) instead of #777. For modern carriers, you may need to edit the modem properties in Device Manager > Modems > un2420 > Advanced > Extra initialization commands: AT+CGDCONT=1,"IP","your_apn_name"

However, you can usually bridge this gap using a few clever workarounds. Here is a breakdown of how to handle this legacy hardware in a modern environment. 1. The Challenge of Legacy Support The

Compatibility Mode: If the standard installer refuses to run, right-click the setup file, go to Properties > Compatibility, and select Run this program in compatibility mode for Windows 7. Troubleshooting Common Issues HP un2420 Mobile Broadband Module - HP Support Community