How To Unlock Bootloader In Honor 9 Phone [repack]

Unlocking the bootloader of an Go to product viewer dialog for this item.

• Remove the SIM tray.
• Unscrew the two small screws at the bottom of the phone (near the USB port).
• Use a spudger to carefully separate the glass back from the frame (it’s glued). Heat with a hairdryer if needed.
• Locate the test point: On the HONOR 9 motherboard, near the SIM card slot, there is a tiny unlabeled gold circle (TP). You will find guides on XDA with a photo—short this circle to the metal shielding around the camera.
• While shorting, reconnect the USB cable. The phone will enter a special low-level engineering mode.

fastboot devices

Conclusion: Should You Unlock a HONOR 9 in 2024? How to Unlock Bootloader in HONOR 9 phone

Step 2: Install Fastboot and ADB Drivers Unlocking the bootloader of an Go to product

Part 6: Frequently Asked Questions

Q: Can I relock the bootloader?

A: Technically yes (fastboot oem relock CODE), but do not do it unless you are reverting to 100% stock to sell the phone. Relocking with custom software will brick the device. Remove the SIM tray

Subject: Methods and feasibility of unlocking the bootloader on the Honor 9 (model STF-L09 / STF-AL00). Date: October 26, 2023 Status: Advisory/Technical Guide

• Download the specific TWRP image for HONOR 9 (codename: stf). Use version 3.3.1 or newer.
• Flash it: fastboot flash recovery_ramdisk twrp_filename.img (Note: HONOR 9 uses recovery_ramdisk, not recovery).
• Boot directly into TWRP after flashing (hold Volume Up + Power during reboot).

• Backup Everything: Unlocking the bootloader performs a factory reset. You will lose all data.
• Battery: Ensure the phone is charged above 50%.
• PC: You need a Windows PC (Mac/Linux can work but Windows is standard for the required tools).
• Cable: Use the official USB-C cable to ensure a stable data connection.