How To Install Olivetti Pr2 Plus Printer On Windows 10 May 2026

To install an Olivetti PR2 Plus passbook printer on Windows 10, follow these steps to manually configure the driver and connection settings. 1. Connection & Initial Setup

Issue 2: Test page prints halfway then stops

Cause: Paper size mismatch or form length not set. Solution: In printer properties → Advanced → Print processor → Change to “WINPRINT” and set “Default datatype” to TEXT. Then set custom form length as described above. how to install olivetti pr2 plus printer on windows 10

• Use compatibility mode when running the driver installer (right-click > Properties > Compatibility), choose an earlier Windows version (e.g., Windows 7), then run installer as administrator.

• Windows 10 (32-bit or 64-bit) with Administrator privileges.
• USB cable (Type-A to Type-B) or parallel cable (if using a PCI-e parallel adapter).
• Printer powered on and set to the correct emulation mode (usually OKI 393/395 or EPSON FX-850).
• Important: If using USB, drivers for the USB-to-parallel bridge inside the printer are required (provided by Olivetti or a generic “USB Printing Support”).

Step 4: Configuration and Emulation

Once installed, the printer may not print correctly immediately. You need to match the printer's Emulation Mode to the driver. To install an Olivetti PR2 Plus passbook printer

Install the Printer Driver:

To ensure the printer handles passbooks correctly, you may need to adjust the paper settings: Go to Printer Properties > Preferences > Advanced . Use compatibility mode when running the driver installer