Hi Sharp Dvr Reset Password New -

How to Reset Hi-Sharp DVR Password (New Methods & Master Passwords)

If you are locked out of your Hi-Sharp DVR and seeing an "Invalid Password" or "Login Failed" message, you are not alone. Hi-Sharp DVRs often require a specific reset procedure involving a Master Password or a Super Password based on the current date and time of the system.

• Download official firmware for your exact model from Sharp support.
• Follow firmware update instructions (often via USB) to restore factory settings — this will erase recordings. Only do this if other methods fail.

Take a photo of the dynamic code page or QR code that appears. hi sharp dvr reset password new

Method 2: Using the Reset Button

Most Hi Sharp DVR devices have a reset button located on the back or bottom of the device. Here's how to use it: How to Reset Hi-Sharp DVR Password (New Methods

Summary Checklist

1. Try default passwords (admin/admin, super/super).
2. Look for a Hash Code on the screen and use a password calculator tool.
3. Open the case and short the RESET jumper pins.
4. Remove the CMOS battery for 15 minutes.
5. Check for hard drive failure if the problem recurs.

What you need to provide:

The Test: Disconnect the hard drive cables from the motherboard and try to boot the DVR. If it boots instantly and lets you in, your drive is the culprit, not the password. Replace the drive, and the stability will return. Download official firmware for your exact model from

Newer Hi Sharp models include a self-service recovery option via the local interface. Navigate to the login screen on your DVR monitor. Click on "Forget Password" or "Retrieve Password".