Firmware Reset Samsung Ml 2160 2165 2160w 2165w Better -

Guide to Firmware Reset for Samsung ML-2160 and ML-2165 Series Resetting the firmware on your Samsung ML-2160

button for about 10 seconds until the LED flashes once, then release. This report contains the Serial Number Firmware Version Supplies Information: Print Screen / WPS firmware reset samsung ml 2160 2165 2160w 2165w

Warning: Some service resets are region-restricted and may violate service agreements. Guide to Firmware Reset for Samsung ML-2160 and

External Resetter: You can buy small handheld devices that press against the chip pins to reset the counter to "Full". A Windows Computer: (Windows 7, 8, 10, or 11)

Prerequisites

1. A Windows Computer: (Windows 7, 8, 10, or 11).
2. USB Cable: The printer must be connected directly to the PC.
3. Firmware File: You must download the correct firmware version for your specific model (e.g., ML-2160 vs ML-2160W). Do not use ML-2160 firmware on an ML-2165W, as this can "brick" the device.

Step 4: Load the Old Firmware

1. In the Utility, click “Open File” or “Load Firmware.”
2. Navigate to your downloaded V3.00.01.13.hd file.
3. Ensure the “Write” or “Flash” button is active.

Connect the printer to the computer:

Important: The "W" models (2160W/2165W) have different firmware due to Wi-Fi hardware. Do not cross-flash.