Performing a factory reset on an Evoko Liso Go to product viewer dialog for this item.
is a two-step process: executing the reset (usually via a USB stick) and verifying that the device has returned to its "Out of Box Experience" (OOBE). 1. How to Perform the Reset
device, you must use a bootable USB flash drive created with specific firmware reset files provided by Biamp (formerly Evoko) evoko liso factory reset verified
Insert USB: Plug the prepared reset drive into the USB port on the back/bottom of the unit.
Prepare the USB: Download the latest firmware from the Biamp/Evoko Support Page and load it onto a FAT32-formatted USB drive. Performing a factory reset on an Evoko Liso
If you still have access to the device and only need to change settings without a full wipe, use the Admin Panel: Tap the Menu/Information icon on the screen.
Use imaging software like Etcher to flash the image onto a USB drive. Initiate the Reset: Power off the Liso by disconnecting the PoE or power cable. Official Documentation : Start with Evoko's official website
If you need a single, grammatically proper sentence with an article, the best choice is: