Call 1-800-808-3903
The Epson M2120 Resetter, also known as the Adjustment Program, is a specialized utility used to resolve "Service Required" errors. This error occurs when the printer's internal waste ink pad counter reaches its limit, causing the printer to stop functioning. Why You Might Need It
For users who prefer not to use PC software, a hardware Epson M2120 Resetter is a tiny PCB with contacts and a button. Here’s how it works: Epson M2120 Resetter
Turn the printer off, wait 10 seconds, and turn it back on. The error lights should disappear. Run a nozzle check—if it prints cleanly, the reset was successful. The Epson M2120 Resetter , also known as
If your printer is brand new and hit the error early (common with EcoTanks that do frequent head cleans), a reset is perfectly safe. However, if your M2120 is 3+ years old and has printed thousands of pages, the waste ink pad inside is likely soaked. Here’s how it works: Step 6: Finalize Turn
To prevent the pads from overflowing and leaking ink onto your desk, Epson programs a counter into the printer firmware. Once that counter hits a pre-set limit (indicating the pads are "full" based on estimated usage), the printer locks itself to prevent damage. This is known as the "Waste Ink Pad Counter."
The Epson M2120 Resetter (also known as the Adjustment Program) is an essential maintenance tool for users of the EcoTank M2120. It primarily addresses the "Service Required" or "E-11 Ink Pad Needs Service" error, which occurs when the printer's internal waste ink counter reaches its limit. Key Performance Features