Epson L3115 Printer Resetter Adjustment Program _hot_ Today

The Frustrating Experience

• Does it work? Yes. This program resets the waste ink counter to zero, instantly clearing the error and allowing the printer to function again.
• Value: It saves the user the high cost of a service center visit or buying a new printer.

1. Download & Extract: Find the tool from a reputable tech forum (e.g., 2manuals). Disable your antivirus temporarily (false positives are common here).
2. Run as Admin: Right-click AdjProg.exe → Run as administrator.
3. Select Model: Click Select and choose "L3115" from the list.
4. Connect: Ensure the printer is powered ON via USB only.
5. Enter Key: You will see a key request screen. Use a universal key generator (usually included in the download zip). Common keys: 100% or 0000 – but each version differs.
6. Navigate to Waste Ink Pad: Go to Particular adjustment mode → Waste ink pad counter.
7. Read & Check: Click Check to see the current counter value. If it is above 100%, you are locked.
8. Reset: Click Initialization (not "Reset" on the main page). A progress bar will run.
9. Power Cycle: Turn the printer off, wait 10 seconds, turn it on. The error should be cleared.

1. Open the printer case (voids warranty if still active).
2. Remove the waste ink pads (sponges) or install a waste ink bottle kit.
3. Drain the old ink and wash the pads (or replace them).

The Process

Step 1: Download and Disable Antivirus Because this is a "hacking tool" or "service tool," antivirus software (especially Windows Defender) often flags the .exe file as a Trojan or HackTool. This is usually a false positive because the program writes directly to printer firmware. Proceed at your own risk. Add the folder to your antivirus exclusions list. Epson L3115 Printer Resetter Adjustment Program

• Disable antivirus temporarily (some reset tools may be flagged as false positives).
• Run AdjProg.exe as Administrator.
• Select the correct Printer Model (Epson L3115 Series) and Port (USB00x or Epson USB).

(or the L3110 series, which often shares the same utility), and set the Port to Auto Selection Adjustment Mode : Click on Particular Adjustment Mode Waste Ink Counter : Locate and select Waste ink pad counter from the list, then click Check & Initialize Check the boxes for Main pad counter Platen pad counter if available). to verify the current counter percentage. Initialize to reset the counters to zero. The Frustrating Experience