Citizen Eco Drive Gn4ws12g Manual Link -

The text GN-4W-S on your watch case back is not the model or caliber number; it is a code for the case type. To find the specific manual for your Citizen Eco-Drive, you must locate the 4-character movement (caliber) number engraved on the back. 🛠️ Finding Your Manual

The Crown Positions (Pulled out in 2 clicks)

• Position 0 (Pushed in): Normal running. Screw-down crown (if applicable) should be locked for water resistance.
• Position 1 (Half-pull): Date setting. Turn the crown clockwise to change the date.
• Position 2 (Full pull): Time setting. Stop the second hand at 12 o’clock (for precise syncing), then set hours/minutes.

World Time: Allows you to easily view the time and calendar for various cities globally. citizen eco drive gn4ws12g manual link

| Action | Button Sequence | Result | |--------|----------------|--------| | Start timing | Press top pusher (A) | Large seconds hand begins moving | | Stop timing | Press top pusher (A) again | Chronograph stops, displays elapsed time | | Reset to zero | Press bottom pusher (B) | All chronograph hands return to 12:00 | | Split timing (if supported) | Press bottom pusher while running | Temporarily stops display while internal timing continues | The text GN-4W-S on your watch case back

Because Citizen uses movement numbers (like GN-4W-S) rather than model numbers on their case backs, finding the right guide can be tricky. Below is the direct link to the setting instructions and a quick-start guide to the watch’s most common functions. Position 0 (Pushed in): Normal running

Manual & Official PDF Link

For the exact GN4-W S12G manual and official instructions, download the PDF from Citizen’s support/manuals page. Look up the model number GN4-W S12G on Citizen’s website or their manuals/downloads section to get the official manual and warranty information.

1. Pull the Crown out to Position 2 (one click out).
2. Turn the Crown clockwise to set the date. (Do not set the date between 9:00 PM and 1:00 AM to avoid damaging the mechanism).
3. Pull the Crown out to Position 3 (second click).
4. Turn the Crown to move the hands. The hands will stop moving while you adjust the time.
5. Push the Crown back in to the normal position to start the watch.

• To Charge: Expose the dial to direct sunlight or bright fluorescent light.
• Charge Time: Approximately 2–3 hours in direct sunlight will fully charge a depleted battery.
• Low Charge Warning: If the second hand begins to move in 2-second intervals, the watch is low on power and needs immediate light exposure.

• “Citizen Skyhawk A-T U680 manual PDF”
• “Citizen Navihawk GN-4-WS manual”