Chaser Che80 Print Driver May 2026

To install the driver for your Chaser CHE80 (also known as the

• Always download from official Chaser sources or the included CD.
• Match the driver to your interface (USB, Ethernet, BT, Serial).
• For POS software, install the OPOS driver separately.
• When in doubt, a clean uninstall/reinstall fixes 90% of driver issues.

Update Schedule

• Check quarterly: Visit the Chaser support site for driver updates. New versions fix Windows 11 24H2 compatibility or improve barcode font rendering.
• Roll back if needed: If a new driver breaks your setup, in Device Manager > Driver tab > “Roll Back Driver.”

Print Method: Thermal line printing (no ink/toner required). Paper Width: 80mm standard receipt rolls. chaser che80 print driver

1. Extract: If the file is zipped, right-click and extract it to a folder on your desktop.
2. Run Installer: Look for Setup.exe or Install.exe. Right-click and select "Run as Administrator".
3. Port Selection: During installation, the software will ask for a port.

   Third-Party Drivers: If the official site is down, look for the ESC/POS driver. Since the CHE80 uses standard Epson Emulation (ESC/POS), a universal 80mm thermal driver will often work perfectly. 3. Step-by-Step Installation Guide (Windows) To install the driver for your Chaser CHE80

   1. Perform a hardware calibration (Hold Feed button while powering on).
   2. Access the driver properties > Paper Size > Ensure the "Non-Printable Area" is set to 0mm if the print is cutting off.