Canon Service Tool V5204 Repack (2024)

If you are seeing the "Ink Absorber Full" error on your Canon printer, you likely need a specialized utility to reset the internal counter. The Canon Service Tool V5204

section. The printer whirred, the counter zeroed out, and with a simple restart, the blinking light vanished. The Result canon service tool v5204

Step 3: Exit Service Mode

1. Close the Service Tool.
2. Turn off the printer using the Power button.
3. Wait 10 seconds.
4. Turn the printer on normally. The service error should be gone.

• Use the tool on an old/repurposed laptop or VM; always backup EEPROM, and physically service/replace absorber pads rather than only resetting counters.

• Reset the Waste Ink Counter: This is its primary function. It tells the printer’s EEPROM that the waste ink pad has been “replaced,” even if you have only cleaned or changed it.
• Clear service errors (5B00, 5B01, 5B02, P07): These errors effectively brick the printer without the tool.
• Perform EEPROM initialization: Useful for refurbishing printers or wiping previous user settings.
• Run ink absorption tests.
• Adjust print head alignment at a factory level.
• Retrieve printer logs including total page counts and error histories.

Operating System: It is primarily compatible with Windows XP, 7, 8, and 10. If you are seeing the "Ink Absorber Full"

Allows you to read or clear the printer's non-volatile memory. Nozzle Checks & Cleaning: Close the Service Tool

Step 6: Verify the Reset

• Click the “Test Print” or “Ink Absorber Counter” button. The values should now read 0%.

• Canon’s factory counter is wildly conservative. Pads can often absorb 3x the official limit.
• Newer Canon printers have made pads user-replaceable (e.g., TS series has a removable cassette).
• Extends the life of a perfectly functional printer, reducing e-waste.