Bosch Serie 6 Service Mode ~repack~

The steps to enter service or test mode on a Bosch Serie 6 appliance vary significantly depending on whether you are troubleshooting a washing machine, dryer, dishwasher, or oven. Washing Machines

Entering service mode on Bosch Serie 6 appliances varies by the type of machine. This mode is used for running component tests and viewing saved error codes. Washing Machines For most Serie 6 washing machines, follow these steps: Turn the program selector knob to the position (Spin/Drain). Press and hold the Spin Speed (RPM) bosch serie 6 service mode

At this point, the display should change. Instead of showing a time (e.g., "2:15"), you will likely see: The steps to enter service or test mode

Preparation: Ensure the door is closed and the program dial is in the Off position. Power OFF the machine

  1. Power OFF the machine.
  2. Press and hold the "Start/Pause" button.
  3. While holding, turn the program selector knob one click clockwise.
  4. Release the "Start/Pause" button — the display should show test indicators (e.g., 0:00 or LED patterns) indicating service mode entered.
X