Adjustment Program Epson 1390 Resetter 100%

The Epson Stylus Photo 1390 Adjustment Program (Resetter) is a utility designed to resolve the "Service Required" error, which typically occurs when the printer's waste ink pad counter reaches its factory limit. Overview of the Epson 1390 Adjustment Program

Date Adjustment: Some versions of the resetter require your computer's system date to be set to October 4, 2007, to bypass "date bomb" restrictions. Adjustment Program Epson 1390 Resetter

Step 5: Verify

• Turn the printer off and on.
• The error message should be gone. Print a test page.

Are you currently seeing a specific error message or a flashing light pattern? The Epson Stylus Photo 1390 Adjustment Program (Resetter)

The orange lights died. The green "Ready" LED glowed steady. I loaded a sheet of glossy A3 paper and printed a nozzle check pattern. Every line was perfect—cyan, magenta, yellow, black, light cyan, light magenta. No gaps. No streaks. Turn the printer off and on

• Resetting the waste ink pad counter: This feature helps to resolve issues related to the waste ink pad, which can become full and cause problems with the printer.
• Cleaning and aligning the printhead: The program helps to clean and align the printhead, ensuring that your prints are clear and of high quality.
• Adjusting the printer's settings: The adjustment program allows you to adjust various printer settings, such as the paper thickness and print quality.

To reset your printer's waste ink counter, follow these general steps:

Important Warning: The Physical Ink Pad

Before you run the Adjustment Program, you must understand the risk. The resetter only resets the software counter. It does not physically empty the waste ink pad.

Step 5 – Select the correct model

• In the program, choose “Epson Stylus Photo 1390” from the dropdown menu.
• Click “OK” or “Select”.