Actia Psa Xs Evolution 9780.z5 Driver //top\\

The Actia PSA XS Evolution 9780.Z5 is the industry-standard vehicle communication interface (VCI) used for dealer-level diagnostics on Peugeot and Citroën vehicles. Ensuring the correct driver is installed is critical for the hardware to communicate with diagnostic software suites like DiagBox, Lexia 3, and PP2000. What is the Actia PSA XS Evolution 9780.Z5?

Verification: Once installed, the device should appear as "USB Com Board Driver (Multi-instance)" or "ACTIA USB Devices" without any warning icons. Troubleshooting Common Connection Issues Actia Psa Xs Evolution 9780.z5 Driver

What is Actia Psa Xs Evolution 9780.z5 Driver? The Actia PSA XS Evolution 9780

Keywords used naturally throughout: Actia PSA XS Evolution 9780.z5 Driver, Actia XS Evolution, PSA diagnostics, DiagBox driver, COM port setup, Windows 11 driver signature. Action: Go to Device Manager > Ports (COM & LPT)

  • Action: Go to Device Manager > Ports (COM & LPT).
  • Look for "XS Evolution" or a device with a yellow exclamation mark.
  • Update Driver: Select "Browse my computer for drivers" and point to the installation directory of Diagbox (usually C:\Applicable Systems\Diagbox\... or a subfolder named Drivers).
  • Run installer as Administrator and reboot after installation.
  • If Windows blocks the driver, temporarily disable driver signature enforcement to install, then re-enable it.
  • Use Device Manager to confirm correct COM/USB enumeration; note the assigned COM port for host software configuration.
  • Disable USB power-saving settings and ensure a direct USB connection (avoid hubs) for programming tasks.
  • Keep the XS Evolution firmware updated via the bundled firmware updater.
  • If using multiple diagnostic adapters on the same PC, isolate them (different VMs or clean installs) to prevent driver conflicts.

: Drivers are designed for Windows versions ranging from XP to Windows 11 (x86 and x64) VCI Recognition

Shopping Cart